https://youtu.be/0DNsge3YjY0 Hi everyone! This is the first of a three part video series where I show you how I built the beefed up camera boom arm that I use to hold my heavy camera on those difficult shots on my videos. This has been kind of an improvised project so you'll see me think through [...]
https://youtu.be/_Qrz-JbLPAU Here it is, at last, the extruder, with a bowden configuration and an E3D clone from somewhere on Ebay. I also bought the fittings and a drive gear with a smaller diameter to improve the torque on the setup. Also learned from one of the comments that adding c-clips on the fittings will help [...]
https://youtu.be/BLSIs9t2vlk Here is a video showing a smartphone holder for tripod mounts.
Red PLA, Without support, no trigger guard. Not really, but yeah! guns! It's a long running project, as I've gotten the grip of infrared data transmission, I'm planing on designing, and building my own version of laser-tag (I'll leave that for another post) and as I needed some test subjects, I did print [...]
When there is a hammer in the toolbox everything seems like a nail. And so I've drawn the contour of my old prescription glasses in 3D and a few minutes and a few drops of acetone after, I'm wearing my own design glasses. Excuse the crudity of the photograph it has been made with a [...]
I've made some atempts at using recycled laptop batteries. One of the issues with 18650 batteries is that the chargers usually charge them in pairs. As the projects where I use are very current intensive, usually the batteries are used eight or twelve at a time and that means lots of chargers. One of the [...]