This is a DIY project and it is meant to be built following the Youtube video and the complete 3D assembly, all the missing measurements can be done there (even I used it during the build for the video). Every component is in there too so when in doubt check it out.
I tried to be as thorough as possible on the video and the 3D model but I cannot guarantee that you can exactly duplicate my results.
Due to safety concerns no electrical/electronic info is provided, just guidance. There's plenty of information about how to wire a CNC shield online and links are provided.
Please be safe, I assume you have some basic safety training and skills to carry out this project. Your tools and workshop will be different from mine so consider these files as a guide only.
Link to the original Fusion 360 projects for the standard and geared versions.
STL files for every component.
Readme file with a few tips and tricks.
All the original project source files exported from Fusion360 including the sources of the motor change modification.
PLEASE NOTE: YOU WILL NEED A MINIMUM BED SIZE OF 250mm x 200mm
In the last modification I added the STLs for the motor and belt change modification and a steps/mm calculator for the belts and rods.
These files include the source files for the all metal conversion to machined parts, including the sources but there's no other documentation. If you're getting these files to build the all metal CNC do it at your own risk. There's no BOM or documentation other than the rough files I used to make it.